|
Post by deathshead on Jun 24, 2008 4:20:03 GMT
Hi, after a bit of advice
I ve just picked up a Megatron 16S from the US with, you know what....an orange cap. I went for it as it was cheap, but is there anyway to remove/modify this ugly thing?
Thanks Deathshead
|
|
|
Post by phantomfish on Jun 24, 2008 9:16:36 GMT
If its the common cap that came from Bigbadtoystore then yes it is easy to remove. Grab hodl of it with some pliers, twist it back and forth which will loosen the glue and then pull it out.
|
|
|
Post by deathshead on Jun 24, 2008 14:28:31 GMT
Thanks for the reply
I dont know where it originated from but could be BBTS as I think most are from there. Was only $39.99 buy now so worthit though it will look darn ugly if im stuk with it. Otherwise might try and do a custom on him all else failing.
|
|
|
Post by phantomfish on Jun 24, 2008 16:01:55 GMT
It should come out but you definitely need to twist it back and forth first to break the glue that holds it in place. Just pulling won't cut it!
|
|